Новий

Мережева Карта 10G, 2x SFP+ порта (NIC Mellanox ConnectX®-3 Based)

100G Мережева Карта 2x QSFP28 (Mellanox ConnectX®-4)

Name: 100G Мережева Карта 2x QSFP28 (Mellanox ConnectX®-4)
Brand: Mellanox
SKU: 15400
Availability: BackOrder

16,880.00 грн.

100G Серверна Мережева Карта, 2x 100G QSFP28 порта (NIC Mellanox ConnectX®-4)

Доступно за замовленням

Порівняти

Додати до списку бажань

Артикул: 15400 Категорія: Мережеві карти (NIC)

Опис
Q & A

Опис

100G Мережева Карта, 2x 100G QSFP28 порта (NIC Mellanox ConnectX®-4 Based)

Опис:

Мережевий адаптер PCIe x16 Mellanox ConnectX-4 Dual-Port 100G з підключенням до Ethernet 100 Гбіт/с забезпечує високу продуктивність і гнучке рішення для платформ web2.0, хмари, аналітики даних, баз даних і сховищ із експоненціальним зростанням даних, що передаються. У зв’язку з експоненційним зростанням даних, якими спільно користуються програми та соціальні мережі, потреба у високошвидкісних і високопродуктивних обчислювальних центрах і центрах обробки даних стрімко зростає.

It support I/O Virtualization, overlay networks, RDMA over Converged Ethernet(RoCE), Mellanox PeerDirect, storage Acceleration and etc. functions.

Specification

PCI-Express host interface specification v3.0 x16 compliant with 2.0 and 1.1 compatible
2.5Gbps, 5Gbps, or 8Gbps link rate X16
Auto-negotiates to x16, x8, x4, x2 or x1
Support for MSI/MSI-X mechanisms
Support 100GbE/56GbE/50GbE/40GbE/25GbE/10GbE/1GbE transmission data rates
Support IEEE802.3bj, 802.3bm, IEEE802.3ba, IEEE802.3ae, IEEE802.3az, IEEE802.3ap, IEEE802.3ad network protocols
1Q,802.1P VLAN tags and priority
1Qau(QCN)-congestion Notification
Support IEEE802.1Qaz, IEEE802.1Qbb, IEEE802.1Qbg, IEEE1588v2
Jumbo frame support up to 9.6KB
Mellanox PeerDirect RDMA communication acceleration
Advanced memory mapping support, allowing user mode registration and remapping of memory
RDMA over Converged Ethernet (RoCE)
TCP/UDP/IP stateless offload
LSO, LRO, checksum offload
Hardware offload of encapsulation and decapsulation of NVGRE overlay network
SR-IOV up to 256 virtual functions
SR-IOV up to 16 physical functions per port
Support Remote boot over Ethernet ,Remote boot over Iscsi, PXE and UEFI

All Description and Features 100G QSFP28 NIC

Feature tab

Product Name	PCIe X16 Mellanox ConnnectX-4 Dual-Port 100G Network card
Bus type	Uses PCIe Gen3.0 (8GT/s) through an x16 edge connector, Gen1.1 and 2.0 compatible
Controller	Mellanox ConnectX®-4
Ethernet Data Rate	1/10/25/40/50/100GbE
Network Connector Type	2-Ports QSFP28
Standard	Mellanox adapters comply with the following IEEE 802.3 standards: • 100GbE / 56GbE / 50GbE / 40GbE / 25GbE / 10GbE / 1GbE • IEEE 802.3bj, 802.3bm 100 Gigabit Ethernet • IEEE 802.3by, Ethernet Consortium25, 50 Gigabit Ethernet, supporting all FEC modes • IEEE 802.3ba 40 Gigabit Ethernet • IEEE 802.3by 25 Gigabit Ethernet • IEEE 802.3ae 10 Gigabit Ethernet • IEEE 802.3ap based auto-negotiation and KR startup • Proprietary Ethernet protocols (20/40GBASE-R2, 50GBASE-R4) • IEEE 802.3ad, 802.1AX Link Aggregation • IEEE 802.1Q, 802.1P VLAN tags and priority • IEEE 802.1Qau (QCN) • Congestion Notification • IEEE 802.1Qaz (ETS) • IEEE 802.1Qbb (PFC) • IEEE 802.1Qbg • IEEE 1588v2 • Jumbo frame support (9.6KB)
Protocol Support	Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII
Operating Temperature	0 °C to 55 °C (32 °F to 131 °F),Non-operational -40 °C to 70 °C
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)
LED Indicators	• A constant Green indicates a link with the maximum networking speed. • A constant Yellow indicates a link with less than the maximum networking speed.
Bracket	Full-height bracket installed; Low-Profile bracket included in package
Power Consumption	MAX 24.5W
Dimension	167mm x 69mm
Supports Operating Systems	Windows Client:8/8.1/10/11 Windows sever:2012/2012 R2/2016/2019/2022 Linux: RHEL/CentOS/SLES/Ubuntu/FreeBSD/UOS/OPENEULER/KYLIN/EULEROS/DEBIAN/CTYUNOS/BCLINUX/ALIOS
Virtualization Features	Next-generation VMDq, SR-IOV, Virtual Machine load balancing (VLMB), Advanced Packet Filtering, VLAN, VxLAN, NVGRE, GENEVE,
Manageability Features	PXE, UEFI, iSCSI,

Package content

1 x PCIe x16 Mellanox ConnectX-4 Dual-Port 100G Ethernet adapter
1 x User’s Manual
1 x CD Driver
1 x Low profile bracket
Accessories

System Requirements

WindowsR8/8.1/10/11,Winserver2012/2016/2019/2022
Linux: RHEL/CentOS/SLES/Ubuntu/FreeBSD/UOS/OPENEULER/KYLIN/

EULEROS/DEBIAN/CTYUNOS/BCLINUX/ALIOS

An available PCI Express x16 slot

Hardware installation

Turn off the computer and unplug the power cord
Remove the computer cover and the adapter slot cover from the slot that matches your adapter
Insert the adapter edge connector into the slot and secure the bracket to the chassis
Replace the computer cover, then plug in the power cord
Power on the computer

Install Drivers and software

WindowsR Operating Systems

You must have administrative rights to the operating system to install the drivers.